Leaky faucets are a problem for homeowners. They can be very expensive to fix, and in some cases may only need a few parts replaced to make them stop leaking. Learn how to replace your leaky faucet with a DIY tub repair kit from your hardware store and follow the step-by-step instructions provided.
Image Source: Google
Common Causes for a Leaky Bathtub Faucet
-A worn-out washer: Over time, the washer in your faucet can become worn out and no longer provide a tight seal.
-Loose packing nut: The packing nut is what holds the valve stem in place.
-Damaged O-ring: The O-ring is a small ring that helps to create a seal between the valve seat and the valve stem.
Cleaning and Caring for your Leaky Faucet
1. Remove the handle from your faucet. This will usually involve removing a screw or two.
2. Use a wrench to remove the retaining nut that holds the washer in place.
3. Take out the old washer and replace it with a new one. Make sure that the new washer is the same size and shape as the old one.
4. Put everything back together and turn on the water supply. Test your faucet to make sure that the leak has
Some Preventative Measures to Reduce Future Leaks
1. Check all the rubber washers and o-rings in your faucet for cracks or wear and replace them if necessary.
2. Apply a thin layer of the plumber's putty to the threads of the faucet stem before screwing it back in place. This will help create a watertight seal.
3. Use Teflon tape on the threads of the faucet stem and/or the valve seat to further prevent leaks.
4. When turning the water back on, do so slowly to avoid putting too much pressure on the new seals.
A leaky bathtub faucet can be a real pain, not to mention it can waste a lot of water. If you're not sure how to fix a leaky bathtub faucet, this article will show you how. It's not as difficult as you might think, and it's something you should do sooner rather than later. Trust us, your wallet will thank you!